Content

Steel Fabrication Case Study

Custom Fabrication of Security Gates at Sony Pencoed.

 

Our client needed a complete renewal of their security gates due to them rusting and becoming insecure.

 

The Samatrix fabrication team met the client on site to survey the existing gates, followed by a comprehensive report, competitive quotation & full scope of works.

 

The gates were designed & fabricated in-house by our team of BSEN1090 accredited welders. Galvanised steel was used & finished with blue paint to replicate the previous design.

 

The team installed the gates on site & our electrical engineer re-fitted the numeric keypad & maglocks. The job was completed with a clean-up of the site, completion certificate & electrical certificate. before.JPGafter.JPG

 

Functional, Decorative and Attractive

In addition to increasing the security of your commercial or domestic property, our steel gates and railings can be supplied in a range of finishes – meaning that you can choose security products which are not only functional but can also be attractive!

Our grilles come in many shapes and sizes and are designed to individual requirements, including:

  • Upright & horizontal bars
  • Discreet bars set behind window cross rails
  • Wrought iron grilles which can be set either internally or externally
  • Steel mesh panels

These security products can be installed as permanent fixtures or can be hinged or fully detachable.

 

Call us on 0845 521 214 to discuss your fabrication project.

 

 


 


Filtration Unit – Toyoda Gosei

The client required a custom built filter skid unit to bypass the original feed line back into the system. Samatrix carried out a site survey & designed a skid unit with stainless steel & 2” pipework schedule 10. By connecting the inlet pipe straight to the pump, the unit pumps the contaminated water through the filters (25 microns) then back up into the system free of any particles. With 2 filters on the unit, 1 filter can be changed and the unit will remain running by isolating the valves. All the stainless steel butt welds were purged and passivated creating a high quality unit at a competitive price.

The client can dramatically increase the life of their critical wear components on rotational equipment, minimising downtime and maximising profitability.  



Talk to us about your project: call us on 0845 521 214 to find out more about our fabrication services.

 

The team installed the unit on site by cutting a section of the pipe & fitting it to the existing pipework

toyoda-gosei-czech-sro.png
steel fabrication 2.png

fabrication.jpg